Quality Bentonite Products
TMP Custom Sealant Bentonite
TMP Custom Sealant Bentonite is high-swelling sodium bentonite of exceptional purity and is not treated with polymers. Mined and processed in southeastern Oregon, it offers superior performance for use as a soil sealant. It forms impermeable barriers for sanitary landfills, hazardous waste sites, sewage lagoons, wetlands, and other facilities.
Application rates primarily depend on the on-site soil and target hydraulic conductivity (permeability.) One or more permeameter and/or barrel tests using the on-site soil provide the best method of determining the correct TMP Custom Sealant to soil mix. Proper mixing and compaction are essential for a good seal. Pre-hydration is necessary if the facility will hold fluids other than clean water.
TMP Perma Plug Bentonite
PERMA PLUG® Bentonite is a high‐purity, dust‐free, granular sodium bentonite product for sealing abandoned drill holes and annular spaces. The coarse size allows rapid sinking through standing water. Produced from a special, slow swelling sodium bentonite, PERMA PLUG® ensures plugging the enre length of the drill hole without bridging.
We have superior quality bentonite and zeolite products that are used by varied industries all over the world. Contact us today for more information.
TMP Industrial 200 Bentonite
TMP Industrial 200 Bentonite is a high swelling sodium bentonite suitable for a wide variety of industrial uses, including soil sealant, grouting, slurry trenching, horizontal drilling, pelletizing, water well drilling, and cementation of drill holes. This bentonite comes from an extremely pure deposit in eastern Oregon and contains a very high Montmorillonite content, the active clay mineral.
TMP Industrial 200 is not treated with polymers.
Mixing instruction for grout:
TMP INDUSTRIAL 200
per one 50 lb. bag:
Solids Content:
15% - 34 gallons of water
20% - 24 gallons of water
25% - 18 gallons of water
TMP Minus 5 Bentonite
Minus 5 Bentonite is a high-swelling sodium bentonite, not treated with polymers. Mined and processed in southeastern Oregon, it offers very good performance for use as a soil sealant. It forms impermeable barriers for lagoons, dairy ponds, canals and ditches and wetlands. It is also used in road stabilization and animal feed formulations. TMP Minus 5 Bentonite is currently only available in bulk.
Application rates primarily depend on the on-site soil and target permeability. One or more permeameter and/or barrel tests using the on-site soil provide the best method of determining the correct amount of TMP Minus 5 Bentonite to soil mix. Proper mixing and compaction are essential for a good seal. Pre-hydration is necessary if the facility will hold fluids other than clean water.
Quick Navigation
Our Products
Contact Inforamtion
Phone: 541-339-3940
Address: 1925 Hwy 201 S Adrian, OR 97901 USA
Hours:
- Mon - Fri
- -
- Sat - Sun
- Closed
